Click About This Mac > More Info > System Report. If you install a new USB device and Mac OS does not detect it, you can complete the following tests to identify the issue: Open System Information and disconnect the USB device from your computer. Download HDC USB Drivers from here (based on device model number), install it on your computer and connect your device to PC or Laptop successfully. Since HDC Mobiles doesn’t offer PC suite software for its customers, you can connect your device to a computer only by downloading and installing the USB drivers given here. One Plus 2 Usb Drivers For MacDownload Drivers for mtk6577 mediatek device and install on windows 7 or windows 8 32bits or 64bits. MTK6592 / MTK6582 / MTK6589 / MTK6577 / MTK6575 / MTK6572 ADB VCOM Drivers installation by PDAnet. And MT6577 USB VCOM Drivers Manual Installation On Windows PC Download Links: PDAnet for MT6592,MT6589,MT6582,MT6577,MT6575,MT6572 [1] [2] [3] usbdeview: [1] [2] USBDeview (64-bit) MT6577 USB VCOM Driver (W7/Vista/XP): [1] [2] MT6577 USB VCOM Driver (W8): [1] Download Links For Micromax USB Drivers For All Models: [1] [2] Download Links For Micromax All Flash File: Instructions MTK6577 USB VCOM Driver Installation How to install an unsigned driver on Windows 8: MT657x (MT6515 / MT6575 / MT6577) flashing tutorial with download link and password: How To Install MTK Driver In Windows XP/Vista/7. The easiest way to go about installing our is by starting with the device. • If you want to verify that the adapter and the driver were installed properly click Connect the device to the Mac. Once connected click on the Apple icon and on ‘About This Mac’ Click on ‘More Info’ Click on ‘USB’ on the left and on the ‘USB-Serial Controller D’ If all is well you should be seeing something like this: Time to get the driver! Usb Driver For MacFire up Safari and browse to and scroll down to Mac. Click on the ‘PL2303 MacOSX10.6 dmg v.1.4.0.zip’, the Safari Downloads window should come up: Double click on the md_PL23-3_MacOSX10 Now double click on the PL2303_1.4.0.dmg to mount the image Now double click on the PL2303_1.4.0 to start the installation Once the installer comes up click ‘Continue’ to proceed. Then ‘Select a Destination’ click on your desired drive and click ‘Continue’ to move forward Now just click ‘Install’ to continue. You may be asked of your username and password – enter them and click ‘OK’ You’ll get a warning about restarting the computer after the installation is complete. This is normal, click ‘Continue Installation‘. Installing should start (takes a couple of minutes to complete) When it’s done you should see this: Click on ‘Restart’ to reboot the Mac. After you restart, check that everything has installed OK. On the Mac there are two methods to determine this: Method 1: Click on ‘Applications’ Click on ‘Utilities’ Click on ‘Terminal’ Type: kextstat| grep prolific and: ioreg -c IOSerialBSDClient| grep usb Your results should be very close to this: Method 2: Click on ‘System Preferences’ Click on ‘Network’ Now click on the ‘+’ sign on the bottom left, and then on the ‘Select the interface and enter a name for the new Service’ click on ‘Interface’ – you should be seeing the ‘USB-Serial Controller D’ there. This will create a “Network” interface for a modem or serial port. Because it’s a serial port, it’ll say “Not Configured” and that’s normal: From the “Advanced” button you can change default settings (usually not needed). And this won’t change the “Not Configured” message – that’s still ok.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2019
Categories |